Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON A-TECH™ 1173 - (PS-HI) - Trinseo

Material Data Center offers the following functions for STYRON A-TECH™ 1173:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Styron A-Tech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 2 g/10min ASTM D 1238
温度 200 °C -
荷重 5 kg -
成形収縮率., 平行 0.0055 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
降伏応力 17.2 MPa ASTM D 638
破壊応力 27.6 MPa ASTM D 638
破断伸び 55 % ASTM D 638
曲げ弾性率 1510 MPa ASTM D 790
曲げ強さ 40.7 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 90.7 J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
UL94 燃焼性 HB - UL 94
追加試験片の厚さ 1.5 mm -
DTUL @ 264 psi 71.1 °C ASTM D 648
ビカット軟化温度 104 °C ASTM D 1525
その他の特性.値単位テスト基準
密度 1040 kg/m³ ASTM D 792
特殊な特性
成形加工法.
その他の押出成形., 熱成形.
特殊な特性.
高耐衝撃及び耐衝撃改良.
耐薬品性
Environmental Stress Crack Resistance
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
冷凍
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.